CAPTAIN SIM FORUM - Print Page

CAPTAIN SIM FORUM
767 Captain (FSX) >> 767 Captain (FSX) >> V-One Callout Gauge for Boeing 767 https://www.captainsim.org/forum/csf.pl?num=1347129676 Message started by fsxpaul on Sep 8^th, 2012 at 6:41pm

Title: V-One Callout Gauge for Boeing 767
Post by fsxpaul on Sep 8^th, 2012 at 6:41pm

This is a First Officer (F/O) call-out XML gauge specifically for the CS (Captain Sim) 757 and 767. This gauge is not a substitute for correctly programming the CDU/FMS.

Now available in the Avsim library. Search for:
V-One Callout for Boeing 757/767

V-One Call-Out Sounds and Features:
Take-Off:

V1
Rotate
Positive Rate
Gear-Up
Flaps-Up
Slats Retract

Approach:

Slats Extended
Gear Down
Flaps 20
Flaps 25
Flaps 30

Landing:

Spoilers Deployed*
Auto Thrust Available
80 knots
60 knots

Always Available:

Auto Pilot Engage
Spoilers Deployed**
Altitude Alert

[* Auto spoilers must be armed]
[** Call-Out occurs when spoilers set to full (100%)]

Trim and CG Display:

Fuel used is displayed in either LB or KG based on FSX unit settings.
Current aircraft Center of Gravity (CG) is displayed.
Current Trim Units are displayed.

Title: Re: V-One Callout Gauge for Boeing 767
Post by CloudSurfer on Sep 9^th, 2012 at 2:02am

Installed, tested, loved it.

Thank you very much for this!

Title: Re: V-One Callout Gauge for Boeing 767
Post by CoolP on Sep 9^th, 2012 at 6:26am

Me too, especially the CG display comes in handy while the callouts then add to the atmosphere. Great work.

Title: Re: V-One Callout Gauge for Boeing 767
Post by NaMcO on Sep 9^th, 2012 at 11:17am

Do we have to program the gauge, or it may remain closed and will do the callouts automatically?

Title: Re: V-One Callout Gauge for Boeing 767
Post by fsxpaul on Sep 9^th, 2012 at 12:24pm

NaMcO wrote on Sep 9^th, 2012 at 11:17am:

Do we have to program the gauge, or it may remain closed and will do the callouts automatically?

You will need to progam the vspeeds before take-off and then the 'Vspeed Input' can be closed.

All callouts will happen automatically throughout the remainder of your flight.

Title: Re: V-One Callout Gauge for Boeing 767
Post by NaMcO on Sep 9^th, 2012 at 12:41pm

Sounds good (no pun intended!), i'll give it a try :D

Title: Re: V-One Callout Gauge for Boeing 767
Post by Silverbeard on Sep 11^th, 2012 at 7:52pm

Hi tried to install the gauge but ran into trouble. I find that several existing entries in my panel Config do not correlate with yours. eg.-
[Window01]size_mm=48, 288MY Config is = [Window01]size_mm64, 256
IN Window 06 I have [Window06]size_mm=447, 360
I have now come to a halt . Any help or advice would be appreciated.

Title: Re: V-One Callout Gauge for Boeing 767
Post by fsxpaul on Sep 11^th, 2012 at 11:05pm

Silverbeard wrote on Sep 11^th, 2012 at 7:52pm:

Here's what you need for your panel.cfg (change/add only red items):

[Window01]
size_mm= 64, 288
...
gauge07=...!iExit, �0, 256, 32, 32
...
gauge16=/V-One!v1_Icon, 0, 224, 32, 32

[Window06]
Background_color=16,16,16
size_mm= 447, 725
position=2
visible=0
zorder=85
ident=12105
gauge00=...!cdu, 0, 0, 447, 699
gauge01=/V-One!CG_Trim,0,699

Hope this helps.

Title: Re: V-One Callout Gauge for Boeing 767
Post by Silverbeard on Sep 12^th, 2012 at 3:07pm

Brilliant!

Thank's very much.